Foil & multifoil insulation installers in Exeter

Exeter's Heavitree and St Thomas terraces, its inter-war suburbs and the cob-and-slate cottages of the surrounding county each need a different approach.

CityExeter
RegionSouth West
Most common roofOlder Exeter terraces
If foil is wrongWe say so

Breathability matters more in Devon's older walls than almost anywhere else, so foil is a roof conversation here, not a wall one.

Exeter's housing and what it means for insulation

Victorian terraces in St Thomas, Heavitree and Newtown, inter-war semis in Pennsylvania and Countess Wear, post-war estates at Whipton and Beacon Heath, and a surrounding county of cottages, cob and slate. Exeter's newer suburbs add 1990s–2010s stock.

Typical Exeter enquiries

  • Terrace loft conversions in Heavitree and St Thomas
  • Cottage and cob-walled roof build-ups
  • Inter-war semi loft rooms
  • Loft floor upgrades in Whipton

Qualitative pattern from Exeter's housing stock; replaced with aggregated, anonymised Exeter enquiry data as it builds.

Older Exeter terraces: shallow rafters and back additions

Heavitree and St Thomas terraces are the conversion stock; the county's cob and stone cottages need breathable, designed roof build-ups rather than a standard detail.

Older roofs can have significantly less usable insulation depth than modern constructions. Rafter dimensions, underlay type, ventilation and any rear or addition roof must therefore be checked at the property before a multifoil or hybrid build-up is specified. Where depth is limited, the usual investigation is multifoil under the rafters with battens forming the room-side air space; where a target U-value applies, PIR between the rafters is added. The party-wall junction and any existing damp staining decide whether the job is straightforward.

Coverage around Exeter

Assessment and installation are allocated by postcode and project type across Exeter and these surrounding areas:

Heavitree
St Thomas
Pennsylvania
Countess Wear
Whipton
Topsham
Exmouth
Crediton
Tiverton
Newton Abbot

We also cover Cheltenham, Plymouth, Gloucester and the rest of the South West.

How it works, briefly

Postcode → property questions → assessment where a physical inspection is needed → recommendation → fixed quote → installation. Every step runs to the InsulationMatch installation standard; the installing company is named on the quote. Multifoil itself is explained in the multifoil guide, and what moves a price in the cost guide. Local ranges are published here only once genuine Exeter quotes exist.

Local projects

Documented Exeter projects are added to the project library as they complete. Until then the library's typical project scenarios show how the housing above is assessed.

Questions homeowners ask

Do you install foil insulation in Exeter?
Yes — assessment and installation capability covers Exeter and the areas listed on this page, allocated by postcode and project type. The check tells you the coverage position before asking for contact details.
What insulation works best in a typical Exeter home?
For the older terraces, rafter-level multifoil is the usual loft-room route because the rafters are shallow; for an open loft that stays cold, mineral wool to 270mm is the better answer.
How much does multifoil installation cost locally?
We do not invent city prices. National indicative ranges are in the cost guide — roughly £45–£80 per m² for multifoil to rafters — and a fixed price follows the property assessment.
Do you do ordinary loft insulation as well as foil?
Yes, and for an open loft floor we usually recommend it. Foil is suggested only where the roof, the depth and the intended use make it the better route.

Your home. Your options. One clear next step.

Free and independent. We show you a likely route before we ask for any contact details.